Plug & Play: On The Road in 10 Minutes

This version of Elecbrakes (ELBC2000 P1.5) comes with a user specified adapter allowing the user to mount the unit, connect the adapter plugs to the tow vehicle, trailer and elecbrakes device and be on the road with proportional brake control in 10mins.

This plug and play version of the elecbrakes device (ELBC2000 P1.5) has identical functionality to our standard hardwired version (ELBC2000), the difference being that it comes with waterproof connecters and the adapters are pre wired, taking away any requirement for the user to splice Elecbrakes into the trailer existing circuits.

The ELBC2000 P1.5 requires a user specified adapter to operate, the adapter configuration takes into consideration the tow vehicles socket and the trailers plug to suit the needs of the user. Adapters are available in all common combinations using flat 7 and 12 sockets and plugs and well as 7 pin round small and large combinations. Additional user specified adapters are available on request.

The Elecbrake plug and play version allows a fully featured proportional electric brake controller to be installed on your trailer and ready to go within 10 minutes

Using the plug and play version of the elecbrakes is a fuss free option saving you time and money of a full install, without compromising on functionality or capabilities.

Providing precise proportional brake control, with multiple user defined braking programs and settings for forward, reverse and minimum brake responses. Allowing the user to dial in brake response perfectly synchronise with the tow vehicle. All without hard wiring to the trailers electrical loom!!

Wireless Brake Controller Features

  • Proportional Braking
  • Multiple braking programs
  • Device stored settings
  • Urethane Resin encased Electronics
  • Water proof
  • Shock proof
  • Fuss Free installation
  • Multiple adapters available
  • Non directional mounting

Electric Brakes Proportional Braking

Elecbrakes employs a high-speed microprocessor and various sensors which continuously sample the operating parameters over 1,000 times per second.

For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures that the device can be mounted anywhere on the trailer's draw bar.

Join the towing revolution